Ask most students what happens when you connect a capacitor to a battery through a resistor, and they'll say "it charges up." True, but that phrase hides the interesting part. It doesn't charge at a constant rate. It doesn't charge instantly. And the exact shape of that charging curve — an exponential, not a straight line — turns out to explain everything from camera flashes to old-school photocopier timing circuits.

Capacitor charge rising exponentially toward its maximum

Why the charging current starts high and dies away

Right at the moment you close the switch, the capacitor is empty — zero charge, zero voltage across it. That means the entire battery voltage lands across the resistor, and current jumps immediately to its maximum value, I₀ = V₀/R. No delay, no ramp-up. This is the part students often get backwards, assuming current should start at zero and build up the way charge does.

As charge accumulates on the plates, though, the capacitor's own voltage rises, and it starts pushing back against the battery. Less voltage is left over for the resistor, so current drops. Not linearly — exponentially, following I(t) = (V₀/R)e^(−t/RC). By the time one time constant (τ = RC) has passed, the current has fallen to about 37% of where it started.

The number that shows up everywhere: 63.2%

Plug t = τ into the charging formula for voltage, V_C(t) = V₀(1 − e^(−t/RC)), and you get V₀ × (1 − e⁻¹), which works out to almost exactly 63.2% of the final voltage. Not 50%, not two-thirds — 63.2%, because that's just where 1/e lands. It's an odd number to memorize, but once it clicks that τ is defined as "the time to reach 1−1/e of the way there," the number stops feeling arbitrary.

Five time constants gets you to 99.3% charged — close enough that engineers treat it as "done." Mathematically the capacitor never reaches exactly V₀; the curve just keeps creeping asymptotically closer forever. In practice, nobody cares about that last 0.7%.

Where this actually shows up

A camera flash is the cleanest real-world example. The camera's small battery genuinely cannot deliver the current a flash bulb needs in the split second it fires — batteries are built for steady, modest current, not sudden bursts. So the circuit charges a capacitor slowly (you can literally hear the whine as it happens, over a second or two), then dumps nearly all of it through the bulb almost instantly when you press the shutter. The capacitor is acting as a kind of energy reservoir, filled gradually and drained fast.

Old windshield-wiper "intermittent" settings, blinking LED novelty circuits, and camera self-timers all lean on the same trick in reverse: since the time to reach any given voltage threshold is precisely predictable from τ=RC, you can build a delay of almost any length just by picking the right resistor and capacitor, with no digital clock involved at all.

A common mix-up worth flagging

Students sometimes assume charging and discharging take different amounts of time — maybe because charging "feels" like it's fighting against something and discharging "feels" like it should be quick. It isn't. Both processes share the exact same time constant τ=RC, because the underlying physics (a capacitor exchanging charge with a resistor) is identical in either direction. What changes is just the direction of current flow, not the timing.

Try it yourself

RC Circuit: Charging & Discharging LR Circuit: Current Growth & Decay