Home / Electricity & Magnetism / LR Circuit

LR Circuit: Current Growth & Decay

NEETJEECBSE
I: 0 A V_L: 0 V Time constant ฯ„: 0 s Elapsed: 0 s

The physics

An inductor opposes any CHANGE in the current through it โ€” not the current itself, but specifically how fast it's changing (V_L = L dI/dt). This self-induced opposition is exactly why current in an LR circuit can't jump instantly to its final value the way it would with a pure resistor โ€” it must grow (or decay) smoothly, following an exponential curve just like an RC circuit's voltage, but with current playing the leading role instead of voltage.

Growth (switch closed): I(t) = (Vโ‚€/R)(1 โˆ’ e^(โˆ’t/ฯ„))   V_L(t) = Vโ‚€e^(โˆ’t/ฯ„)
Decay (switch opened, no battery): I(t) = Iโ‚€e^(โˆ’t/ฯ„)
Time constant: ฯ„ = L/R

Notice the elegant symmetry with the RC circuit: there, VOLTAGE across the capacitor grows like (1โˆ’e^(โˆ’t/ฯ„)) while current decays. Here, CURRENT through the inductor grows like (1โˆ’e^(โˆ’t/ฯ„)) while the inductor's voltage decays โ€” the exact same mathematics, with the roles of voltage and current swapped between the two circuit types.

Exam tip: a very common NEET/JEE trap asks for the current immediately after a switch is closed (t=0โบ) โ€” at that instant, the inductor behaves like an OPEN circuit (infinite resistance), so I(0)=0 exactly, with the full battery voltage appearing across the inductor alone. This is the exact opposite of a capacitor's t=0 behavior (which acts like a short circuit) โ€” don't mix the two up.

Sample data: current growth in an LR circuit

With the switch closed, I(t) = (Vโ‚€/R)(1 โˆ’ e^(โˆ’t/ฯ„)) and the inductor voltage is V_L = Vโ‚€e^(โˆ’t/ฯ„), where ฯ„ = L/R.

TimeCurrent IPercentage of final currentInductor voltage V_L
1ฯ„ = 10 ms0.632 A63.2 %3.68 V
2ฯ„ = 20 ms0.865 A86.5 %1.35 V
3ฯ„ = 30 ms0.950 A95.0 %0.50 V
5ฯ„ = 50 ms0.993 A99.3 %0.07 V

Conditions: L = 0.1 H, R = 10 ฮฉ, Vโ‚€ = 10 V, so ฯ„ = 10 ms and the final current is 1 A.

Notice: after one time constant (10 ms) the current has reached only 63.2% of its final 1 A, and after 5ฯ„ it has reached 99.3%. The inductor voltage falls from 10 V toward zero at the same time. The final energy stored is ยฝLIยฒ = 0.05 J.

๐ŸŽฏ Practice Zone

Puzzle 1. โšก At the exact instant a switch closes on an LR circuit, current is exactly ZERO โ€” yet a fraction of a second later it's flowing freely. Why can't current start flowing immediately, the way it would in a plain resistor circuit?

An inductor generates a self-induced EMF (via V_L=LยทdI/dt) that specifically opposes any change in current through it โ€” at the very first instant, current is trying to jump from zero to some nonzero value, an infinitely fast (and therefore infinitely opposed) rate of change if it happened instantaneously. The inductor's opposing EMF at that instant exactly equals the full battery voltage, leaving zero net voltage available to drive any current at all โ€” current can only begin flowing as the inductor's opposition gradually eases, which is precisely why it must ramp up smoothly rather than jump instantly.

Puzzle 2. ๐Ÿ”Œ Switching off an inductive circuit (like an electromagnet or motor) can produce a genuinely dangerous voltage spike and visible spark at the switch contacts โ€” often far exceeding the original battery voltage. Where does this surprising extra voltage come from, given you're removing the power source, not adding one?

The inductor's self-induced EMF opposes the current DECREASING just as strongly as it opposed the current increasing during growth โ€” when a switch suddenly opens, it's forcing current to change extremely rapidly (from its steady value toward zero, over a very short time as the switch contacts separate), and V_L=LยทdI/dt can become genuinely enormous for this very rapid rate of change, especially with a large inductance. This surge is exactly what causes the visible spark โ€” the inductor essentially "fights back" against the sudden interruption, and this fight can generate voltages high enough to arc across an air gap, a genuinely important practical hazard in circuits with large inductors (like motor windings or electromagnets).

Puzzle 3. ๐Ÿš— A car's ignition system deliberately exploits exactly this inductive voltage spike โ€” using a coil (essentially an inductor) and rapidly interrupting current through it to generate the extremely high voltage (tens of thousands of volts) needed to create a spark plug's ignition spark. Why is this "dangerous side effect" from Puzzle 2 turned into a deliberately useful feature here?

A car's battery alone (typically just 12V) is nowhere near enough voltage to jump the spark plug's air gap and ignite fuel โ€” but by deliberately building up current in an inductive coil, then suddenly interrupting it (using a switching mechanism), engineers exploit exactly the same LยทdI/dt voltage spike that's a hazard in Puzzle 2, specifically to generate the genuinely enormous momentary voltage needed for reliable ignition. This is a beautiful example of the same physical phenomenon being a dangerous nuisance in one context and a deliberately engineered, essential feature in another โ€” purely depending on whether the resulting spike is being managed and directed, or left uncontrolled.

Puzzle 4. ๐Ÿ”„ An RC circuit's capacitor VOLTAGE grows following (1โˆ’e^(โˆ’t/ฯ„)), while an LR circuit's inductor CURRENT grows following the exact same mathematical shape. Given that capacitors and inductors are quite different components, why do these two completely different physical quantities end up following identical mathematical curves?

Both circuits are governed by mathematically identical first-order differential equations, just with different physical quantities playing analogous roles โ€” in the RC circuit, the capacitor "resists" rapid voltage change (requiring current to flow to change its charge), while in the LR circuit, the inductor "resists" rapid current change (generating an opposing EMF). This deep mathematical parallel is why electrical engineers often describe RC and LR circuits as "duals" of each other โ€” voltage and current, and capacitance and inductance, swap roles between the two, but the underlying exponential mathematics remains identical, a genuinely elegant symmetry worth appreciating rather than memorizing as two unrelated formulas.

Puzzle 5. ๐Ÿงฒ A large industrial electromagnet, with a genuinely enormous inductance, takes several full seconds to reach its maximum magnetic field strength after being switched on โ€” while a small electromagnet reaches full strength in a small fraction of a second. Why does the physical SIZE and design of an inductor directly affect how quickly it can respond?

The time constant ฯ„=L/R directly scales with inductance L โ€” a large industrial electromagnet, specifically designed with many coil turns and a substantial iron core to maximize magnetic field strength, inevitably has a correspondingly large inductance as a direct consequence of that same design. This large L means a correspondingly large ฯ„, and hence a genuinely slow current growth (and therefore slow magnetic field buildup), regardless of how much resistance is present. This is exactly why applications needing very fast switching (like high-speed relays) deliberately use small, low-inductance coils, while applications prioritizing raw magnetic strength (like heavy lifting electromagnets) accept the resulting slower response time as an unavoidable engineering tradeoff.

Problem 1 (NEET level). ๐Ÿ“˜ A circuit has R=5ฮฉ and L=5H. Find the time constant ฯ„.

ฯ„ = L/R = 5/5
ฯ„ = 1 second

Problem 2 (JEE Main level). ๐Ÿ“— For the same circuit with Vโ‚€=10V, find the maximum (final steady-state) current, and the current at exactly t=ฯ„.

I_max = Vโ‚€/R = 10/5 = 2 A
I(ฯ„) = I_max(1โˆ’eโปยน) = 2 ร— 0.632 = 1.264 A (63.2% of maximum)

Problem 3 (WBJEE level). ๐Ÿ“™ Find the inductor voltage V_L at t=0 and at t=ฯ„ for the same circuit.

V_L(0) = Vโ‚€ = 10 V (entire battery voltage, since I=0 means zero drop across R)
V_L(ฯ„) = Vโ‚€ร—eโปยน = 10ร—0.368 = 3.68 V

Problem 4 (CBSE Class 12 level). ๐Ÿ“• The same circuit reaches steady state (I=2A), then the switch opens (battery removed, circuit shorted through R). Find the current at t=2ฯ„ after opening.

I(2ฯ„) = Iโ‚€ร—eโปยฒ = 2 ร— 0.1353
I(2ฯ„) = 0.27 A (about 13.5% of the original steady current remains)

Problem 5 (JEE Advanced style). ๐Ÿ““ Find how many time constants are needed for the growing current to reach 90% of its maximum value, using I=I_max(1โˆ’e^(โˆ’t/ฯ„)).

0.90 = 1โˆ’e^(โˆ’t/ฯ„)
e^(โˆ’t/ฯ„) = 0.10 โ†’ โˆ’t/ฯ„ = ln(0.10) = โˆ’2.303
t = 2.303ฯ„ โ€” identical to the equivalent RC circuit result, confirming both circuits share exactly the same underlying exponential mathematics, exactly as discussed in Puzzle 4
๐Ÿ”ฌ
1831

Michael Faraday discovers electromagnetic induction and self-inductance, observing that a changing current in a coil induces an opposing EMF in that very same coil โ€” the foundational discovery underlying every LR circuit's behavior.

๐Ÿ“
1832

Joseph Henry independently discovers self-inductance in America around the same period, and the SI unit of inductance (the Henry) is later named in his honor โ€” Henry also specifically documented dramatic voltage spikes when interrupting current through large electromagnet coils.

๐Ÿš—
Early 1900s

Automotive engineers develop the induction coil ignition system, deliberately exploiting the LR circuit's switch-off voltage spike to generate the high voltage needed for spark plug ignition โ€” directly building on Henry and Faraday's foundational discoveries decades earlier.

โš™๏ธ
20th century

As electromagnets, motors, and transformers became widespread in industry, understanding and managing LR circuit switch-off spikes became a genuinely essential electrical engineering safety concern, leading to the development of protective components (like flyback diodes) specifically to safely absorb this induced voltage.

๐Ÿ’ป
Present day

LR circuit behavior remains essential in modern power electronics โ€” from designing switching power supplies, to protecting sensitive circuits from inductive voltage spikes when motors or relays switch off, all directly built on the same exponential growth and decay mathematics explored in this simulation.