Linear motion has position, velocity and acceleration. Rotation has exactly the same three ideas, just with angles. If you already understand x, v and a, you can learn angular displacement θ, angular velocity ω and angular acceleration α in one sitting. The only thing that needs care is the link between the two worlds.

Same ω everywhere on the disc, but the rim moves faster (v = ωr)

Definitions

Angular velocity ω is the rate of change of angle: ω = dθ/dt, measured in radians per second. For uniform circular motion with period T, ω = 2π/T = 2πf. Angular acceleration α = dω/dt in rad/s². Always use radians in formulas. A revolution is 2π rad, and rpm converts as ω = 2π × rpm / 60.

The bridge to linear quantities

v = ωr   aₜ = αr   aₙ = ω²r = v²/r

Here is the idea students find surprising. On a spinning disc every point has the same ω, but points farther from the centre move faster, because v = ωr. A tiny insect near the hub and one at the rim finish a turn in the same time, but the rim insect covers a much longer circle. The tangential acceleration aₜ = αr depends on r as well, and the centripetal acceleration aₙ = ω²r grows quickly with r.

Same equations as straight-line motion

With constant α:

ω = ω₀ + αt
θ = ω₀t + ½αt²
ω² = ω₀² + 2αθ

It is a direct copy of v = u + at and the other equations, with s → θ, u → ω₀, v → ω, a → α.

Worked check: a ceiling fan speeds up from rest to 300 rpm in 10 s. Final ω = 2π × 300/60 = 31.4 rad/s. α = 31.4 / 10 = 3.14 rad/s². Angle turned = ½ × 3.14 × 10² = 157 rad, which is 157/(2π) = 25 revolutions. For a blade tip at r = 0.6 m at full speed: v = 31.4 × 0.6 ≈ 18.8 m/s and aₙ = 31.4² × 0.6 ≈ 592 m/s², about 60 g. That explains why blade fittings are made strong.

A real example you carry around

Earth turns once in about 86,164 s (a sidereal day), so ω = 2π / 86,164 ≈ 7.29×10⁻⁵ rad/s. At the equator, where r is the Earth's radius 6.378×10⁶ m, v = ωr ≈ 465 m/s. At Kolkata, latitude about 22.6° N, the circle you travel on has radius R cos(22.6°), so your speed is roughly 429 m/s. Same ω for everyone, a different v for each latitude, exactly like the insects on the disc.

Direction of ω

Angular velocity is a vector, along the axis, given by the right-hand rule: curl the fingers of your right hand in the direction of rotation and the thumb points along ω. For a fixed axis you usually only need the sign. When you meet torque and angular momentum later, this direction matters, and it is the reason a spinning wheel resists being tilted.

Try it yourself

Rotational Inertia Vertical Circular Motion Banking of Roads