An object swinging in a vertical circle needs a minimum speed at the top — below that, gravity alone would provide more centripetal force than needed, and the string (which can only pull, not push) would need to push instead, which it can't. So the object leaves the circular path.
This simulation computes speed at every point from real energy conservation (not a fixed speed), then derives tension from Newton's second law in the radial direction — so the "string goes slack" behavior you see for low speeds is a genuine physical prediction, not scripted.
A ball on a string just barely completes a vertical circle when the tension at the top is zero. The table gives those threshold speeds for three radii.
| Radius | Min speed at top √(gr) | Min speed at bottom √(5gr) | Tension at top | Tension at bottom |
|---|---|---|---|---|
| 0.5 m | 2.21 m/s | 4.95 m/s | 0 | 6 mg |
| 1 m | 3.13 m/s | 7.00 m/s | 0 | 6 mg |
| 2 m | 4.43 m/s | 9.90 m/s | 0 | 6 mg |
Conditions: g = 9.8 m/s², minimum-speed case (tension at top is zero).
Puzzle 1. 🎢 At the very top of a vertical loop, moving at exactly the minimum speed, the string tension is exactly zero — yet the object doesn't fall straight down, it continues along the circular path. Why doesn't zero tension mean the object simply falls?
Puzzle 2. ⚠️ If a ball on a string moves slower than the minimum required speed at the top of a vertical circle, what actually happens — does the string simply go slack, or does something more dramatic occur?
Puzzle 3. 🚗 Roller coasters use rigid tracks rather than strings for their loops. Does the "minimum speed" requirement still apply the same way for a rigid track as for a string?
Puzzle 4. ⚖️ Tension at the bottom of a vertical circular loop is always greater than the object's actual weight — sometimes dramatically so. Why must the string pull harder than just supporting the weight at this specific point?
Puzzle 5. 🌍 Would the minimum speed required to complete a vertical loop of a given radius be different on the Moon compared to Earth?
Problem 1 (NEET level). 📘 Find the minimum speed at the top of a vertical circular loop of radius 1m to maintain contact.
Problem 2 (JEE Main level). 📗 Find the corresponding minimum speed required at the BOTTOM of the same loop to just complete it.
Problem 3 (WBJEE level). 📙 Find the string tension at the bottom of the loop for a 0.5kg mass moving at exactly this minimum bottom speed.
Problem 4 (CBSE Class 11 level). 📕 Verify, using energy conservation, that the minimum bottom speed (7 m/s) and minimum top speed (3.13 m/s) are mutually consistent for this 1m-radius loop.
Problem 5 (JEE Advanced style). 📓 Find the minimum speed at the top of a vertical loop of the same 1m radius on the Moon (g=1.62 m/s²), and compare to the Earth value.
Isaac Newton's laws of motion and gravitation provide the complete theoretical foundation for analyzing circular motion under gravity — including, in principle, the vertical circle scenario, though roller coasters and looping rides wouldn't exist for another two centuries.
The first known looping roller coaster, "Centrifugal Railway," opens in Paris — its single loop, built well before rigorous engineering safety calculations were standard, reportedly caused significant discomfort and neck strain to riders due to the extreme forces involved.
Early circular-loop amusement rides largely fall out of favor due to their harsh, uncomfortable, and sometimes genuinely dangerous forces on riders — a direct consequence of using simple circular loops rather than the carefully shaped, engineered loop profiles used today.
Modern roller coasters reintroduce looping elements using carefully engineered "clothoid" (teardrop-shaped, not perfectly circular) loops — this shape keeps centripetal acceleration more comfortable and consistent throughout the loop, directly building on rigorous circular-motion physics like that shown in this simulation.
Vertical circular motion analysis remains essential in aerospace engineering (aircraft loop maneuvers, centrifuge training for astronauts) and mechanical engineering (rotating machinery safety), all building on the exact same minimum-speed and tension principles explored here.