Home / Thermodynamics / Thermal Conductivity

Thermal Conductivity (Fourier's Law)

CBSEJEE
Heat flow rate: 0 W Temp. gradient: 0 °C/m

The physics

Heat conducts through a material at a rate proportional to its thermal conductivity, the cross-sectional area, and the temperature difference — but inversely proportional to the length it must travel through.

Fourier's law: dQ/dt = kA(T₁−T₂)/L
k = thermal conductivity (material property, W/m·K)

The animated dots in this simulation move faster and denser for higher heat flow rates — so you can directly compare, for instance, how a thin glass rod conducts far less heat than a thick copper one, even across the same temperature difference.

Exam tip: a common CBSE/JEE question gives two rods of different materials joined end to end (in series) and asks for the interface temperature — at steady state, the heat flow rate through both rods must be equal, giving you one equation to solve directly.

Sample data: heat flow through a 10 cm thick slab of different materials

dQ/dt = kA(T₁ − T₂)/L for a slab of area 1 m² and thickness 0.1 m with a 20 K temperature difference.

MaterialConductivity kHeat flow
Copper385 W/m·K77,000 W
Aluminium237 W/m·K47,400 W
Glass1 W/m·K200.0 W
Brick0.7 W/m·K140.0 W
Wood (pine)0.15 W/m·K30.0 W
Polystyrene foam0.033 W/m·K6.6 W
Still air0.026 W/m·K5.2 W

Conditions: typical values near room temperature, steady state, one-dimensional flow.

Notice: copper conducts about 11,700 times more heat than polystyrene foam for the same slab (385/0.033), and still air is the poorest conductor of all. Foam and woollen clothes are good insulators mainly because they trap air.

🎯 Practice Zone

Puzzle 1. 🧊 A metal spoon and a wooden spoon, both left sitting in the exact same room for hours, will actually settle to the exact same temperature (room temperature) — yet touching the metal spoon feels distinctly colder than touching the wooden one. Why does something at the identical temperature feel colder to the touch?

This sensation has nothing to do with the spoons' actual temperature (which is genuinely identical) — it's entirely about how quickly each material conducts heat AWAY from your finger. Metal has a much higher thermal conductivity than wood, so it draws heat away from your warm finger much more rapidly, and your skin's temperature-sensing nerves respond specifically to this RATE of heat loss, not the object's absolute temperature. Wood, being a much poorer conductor, draws heat away from your finger far more slowly, letting your fingertip stay closer to its own natural warm temperature — which is exactly why it feels comparatively warmer, despite being at the identical room temperature as the metal spoon.

Puzzle 2. 🧥 Winter clothing (like a puffy jacket) traps a layer of air between the fabric and your skin, and this trapped air is actually the primary reason such clothing keeps you warm — more so than the fabric material itself. Why does trapped, still air make such an effective insulator?

Air has a remarkably low thermal conductivity compared to solid materials — but this insulating benefit only works well when the air is genuinely TRAPPED and prevented from circulating freely (moving air can carry heat away efficiently through convection, a completely different heat transfer mechanism). Puffy winter clothing is specifically designed with a fluffy structure to trap many small pockets of still air close to your body, exploiting air's naturally poor thermal conductivity while preventing convective heat loss — this is exactly why a single thick, dense sweater is often less warm than several thinner, looser layers that trap more distinct pockets of still air between them.

Puzzle 3. 🍳 Cooking pot and pan handles are typically made from plastic or wood, while the cooking surface itself is made from metal — a deliberate design choice combining two very different-conductivity materials in one object. Why does this specific combination make practical sense?

The cooking surface needs HIGH thermal conductivity, specifically to efficiently transfer heat from the stove into the food being cooked — metal is the natural choice here. The handle, by contrast, needs LOW thermal conductivity, specifically to prevent heat from readily traveling from the hot cooking surface into your hand — wood or heat-resistant plastic serves this purpose well. This deliberate combination of a high-conductivity cooking surface with a low-conductivity handle exploits thermal conductivity differences specifically for genuine safety and cooking-efficiency purposes, all in a single, everyday object.

Puzzle 4. 🏠 Double-glazed (double-paned) windows, with a thin layer of air (or gas) sandwiched between two glass panes, provide noticeably better insulation than a single, even thicker, pane of solid glass. Why does splitting the glass into two thinner panes with an air gap outperform one solid, thicker pane?

The trapped air gap between the two glass panes has a considerably lower thermal conductivity than glass itself, meaning this thin air layer actually contributes MORE thermal resistance than an equivalent thickness of solid glass would. Heat flowing through a double-glazed window must pass through this poorly-conducting air layer as an additional barrier, on top of the two glass panes — this combination provides substantially better overall insulation than a single, even noticeably thicker, solid glass pane could achieve alone, precisely because it's specifically exploiting air's inherently low thermal conductivity as an effective additional insulating layer.

Puzzle 5. ❄️ Two rods of the exact same material and cross-sectional area, but one twice as long as the other, are both connected between the same hot and cold temperature reservoirs. Which rod would you expect to conduct heat faster — the longer one or the shorter one?

The SHORTER rod conducts heat faster, for the same temperature difference — heat flow rate is inversely proportional to length (Q/t=kAΔT/L), meaning a shorter path for heat to travel through allows it to flow more rapidly for the same driving temperature difference. This is directly analogous to electrical resistance, where a shorter wire has less resistance and allows more current to flow for the same voltage — thermal conductivity and electrical conductivity share remarkably similar mathematical behavior, both governed by comparable length-and-area-dependent formulas.

Problem 1 (NEET level). 📘 A copper rod (k=400 W/m·K) has cross-sectional area 0.01m², length 0.5m, with a 50°C temperature difference across it. Find the rate of heat flow.

Q/t = kAΔT/L = (400)(0.01)(50)/0.5
Q/t = 400 W

Problem 2 (JEE Main level). 📗 A wooden rod (k=0.15 W/m·K) with identical dimensions and temperature difference conducts heat at what rate? Find the ratio compared to copper.

Q/t = (0.15)(0.01)(50)/0.5 = 0.15 W
Ratio (copper/wood) = 400/0.15 ≈ 2667 — copper conducts heat over 2500 times faster than wood for identical geometry and temperature difference

Problem 3 (WBJEE level). 📙 Two rods of the same material and cross-section are connected end-to-end (in series) between a hot reservoir (100°C) and cold reservoir (0°C). If both rods have equal length and equal k, find the temperature at the junction between them.

By symmetry (identical rods sharing the same heat flow rate), the temperature drop splits equally across both rods
Junction temperature = 50°C (exactly halfway between 100°C and 0°C)

Problem 4 (CBSE Class 11 level). 📕 Now the two series rods have DIFFERENT conductivities: k₁=200 W/m·K and k₂=100 W/m·K, same length and area, same 100°C-to-0°C reservoirs. Using equal heat flow at steady state, find the junction temperature.

Equal heat flow: k₁A(100−T)/L = k₂A(T−0)/L
200(100−T) = 100(T)
20000 − 200T = 100T → 20000 = 300T
T = 66.7°C — the junction sits closer to the hot end, since the higher-conductivity first rod needs a smaller temperature drop to carry the same heat flow as the poorer-conducting second rod

Problem 5 (JEE Advanced style). 📓 A double-glazed window has two glass panes (k_glass=0.8 W/m·K, thickness 0.005m each) with an air gap between them (k_air=0.024 W/m·K, thickness 0.01m), same cross-sectional area throughout. Compare the thermal resistance (L/kA, ignoring A since it's common) contributed by the air gap versus a single glass pane.

Resistance per unit area, glass pane: L/k = 0.005/0.8 = 0.00625
Resistance per unit area, air gap: L/k = 0.01/0.024 = 0.4167
Ratio (air/glass) ≈ 67× — the thin air gap alone contributes roughly 67 times more thermal resistance than a single glass pane, confirming Puzzle 4's explanation for why double-glazing is so much more effective at insulating than thicker solid glass
🔬
1822

Joseph Fourier published his rigorous mathematical theory of heat conduction, establishing the fundamental law (heat flow proportional to temperature gradient) that remains the exact foundation of thermal conductivity calculations used today.

🏗️
Late 1800s–early 1900s

As buildings and industrial equipment increasingly required careful thermal management, engineers began systematically measuring and cataloging thermal conductivity values for different construction and insulation materials, directly informing early building insulation standards.

🧊
1930s

The commercial refrigerator and home insulation industries expanded rapidly, driving significant advances in specifically engineered low-conductivity insulating materials, directly building on Fourier's foundational heat conduction mathematics from over a century earlier.

🏠
Today

Modern energy-efficient building design relies heavily on precise thermal conductivity calculations — from selecting appropriate double-glazing and wall insulation materials, to designing effective heat sinks for computer processors that need the OPPOSITE property: maximum thermal conductivity to efficiently draw heat away.