Home / Electricity & Magnetism / Series & Parallel Circuits

Series & Parallel Circuits

CBSEICSE
R_eq: 0 Ω Total current: 0 A

The physics

How resistors combine depends entirely on whether current has to pass through all of them in sequence (series) or can choose between separate paths (parallel).

Series: R_eq = R₁ + R₂ + R₃  (same I through all, V splits)
Parallel: 1/R_eq = 1/R₁ + 1/R₂ + 1/R₃  (same V across all, I splits)

Notice that adding resistors in series always increases R_eq (more obstacles in the only path), while adding resistors in parallel always decreases R_eq (more alternative paths for current) — this simulation lets you verify both directly by changing R₃.

Exam tip: a common CBSE/ICSE question gives the same three resistors in both configurations and asks for the ratio of equivalent resistances — R_eq(series) is always larger than R_eq(parallel) for any positive resistor values, never the other way round.

Sample data: three resistors on a 12 V supply

The same 10, 20 and 30 Ω resistors are connected in series and then in parallel across 12 V.

ResistorSeries: voltage across itSeries: powerParallel: current in itParallel: power
10 Ω2.00 V0.40 W1.20 A14.4 W
20 Ω4.00 V0.80 W0.60 A7.2 W
30 Ω6.00 V1.20 W0.40 A4.8 W
Total12 V (sum)2.40 W2.20 A26.4 W

Conditions: ideal 12 V source with no internal resistance.

Notice: in series the total resistance is 60 Ω and the current is only 0.2 A, with the largest resistor taking the largest share of the voltage. In parallel the total resistance is 5.45 Ω, less than the smallest resistor, and the total current is 2.2 A, which is the sum of the three branch currents (1.2 + 0.6 + 0.4). The parallel circuit dissipates 11 times more power from the same supply.

🔍 Explore More!

Think About It 1. 🎄 Old-style Christmas fairy lights, wired in series, would all go dark the instant just ONE bulb burned out — a genuinely frustrating design. Why does a single failed bulb break the entire string in a series circuit?

In a series circuit, there's only ONE single path for current to flow — every component shares that exact same path, one after another. If any single bulb burns out, its filament breaks, creating a complete gap in that one and only path — current has absolutely no alternative route to take, so the entire circuit stops working immediately, plunging every other bulb into darkness too, even though they're all still perfectly functional themselves.

Think About It 2. 🏠 If a single light bulb burns out in your house, only that one specific light goes dark — every other light and appliance in the house keeps working completely normally. Why doesn't this household wiring suffer from the same "one failure breaks everything" problem as old fairy lights?

Household wiring uses parallel circuits, not series — every light and appliance has its own separate, independent branch connecting back to the main supply. If one bulb burns out, that specific branch simply becomes an open path with no current flowing through it, but every OTHER branch still has its own complete, unbroken path back to the supply, completely unaffected by the one failed branch. This independence is exactly why modern homes are wired in parallel rather than series, despite parallel wiring requiring more total wire.

Think About It 3. 🔋 Adding more resistors in SERIES always increases the total resistance of a circuit, but adding more resistors in PARALLEL always DECREASES the total resistance — seemingly opposite effects from adding more "stuff" to a circuit either way. Why does adding components produce opposite effects depending on how they're connected?

In series, each additional resistor adds one more obstacle current must pass through along the single available path — naturally increasing total resistance, exactly like adding more speed bumps to a single road makes the whole journey slower. In parallel, each additional resistor instead adds an entirely new, ADDITIONAL path current can take — giving current more total routes to flow through, which actually makes it easier overall for charge to get through the network, exactly like opening more toll booths at a bridge reduces the overall bottleneck, even though each individual booth still has its own resistance.

Think About It 4. 🔌 In a parallel circuit, why does the equivalent (combined) resistance always end up SMALLER than even the smallest individual resistor in the group — not just smaller than the average, but smaller than the very smallest one present?

Every additional parallel branch, no matter how large its own individual resistance, provides current with yet another available path — and having more available paths can only make it easier (never harder) for current to flow overall, meaning combined resistance can only decrease as you add more parallel branches, regardless of each branch's individual value. Even adding a very high-resistance branch in parallel still provides SOME additional path for current, which is why the combined resistance always ends up lower than even the smallest single resistor already present in the group.

Think About It 5. ⚡ A circuit combines both series and parallel sections together — some resistors wired in series, feeding into a group of others wired in parallel. How would you approach finding the total resistance of such a "mixed" circuit?

The reliable approach is working from the "inside out" — first identify and simplify any clearly self-contained parallel (or series) sub-group into a single equivalent resistance, effectively replacing that entire sub-group with one simpler resistor value. Once simplified, the remaining circuit often becomes a simpler, more obviously series or parallel arrangement that you can then combine using the standard formulas — repeating this simplify-and-replace process step by step, rather than trying to solve the entire complicated mixed circuit in one single calculation.

Try It 1 (Class 9-10 level). ✏️ Three resistors (4Ω, 6Ω, 10Ω) are connected in series. Find the total resistance.

R_total = 4 + 6 + 10
R_total = 20 Ω

Try It 2 (Class 10 level). ✏️ The same three resistors (4Ω, 6Ω, 10Ω) are instead connected in parallel. Find the total resistance.

1/R_total = 1/4 + 1/6 + 1/10 = 0.25+0.167+0.1 = 0.517
R_total = 1/0.517 ≈ 1.94 Ω — much smaller than even the smallest resistor (4Ω), exactly as Puzzle 4 explains

Try It 3 (Class 10 level). ✏️ Two resistors (4Ω and 6Ω) are in series, and this combination is then connected in parallel with a third 10Ω resistor. Find the total resistance.

Step 1 (series part): 4+6 = 10Ω
Step 2 (parallel with 10Ω): 1/R = 1/10 + 1/10 = 1/5
R_total = 5 Ω

Try It 4 (Class 9 level). ✏️ In a series circuit with a 12V battery and two equal 6Ω resistors, find the current, and the voltage across each resistor.

R_total = 6+6 = 12Ω
Current = V/R = 12/12 = 1 A (same everywhere in series)
Voltage across each resistor = I×R = 1×6 = 6V each (splits equally here, since resistances are equal)

Try It 5 (Class 10 level). ✏️ In a parallel circuit with a 12V battery and two 6Ω resistors, find the current through each resistor and the total current from the battery.

Voltage across each = 12V (same for every branch in parallel)
Current through each = V/R = 12/6 = 2A each
Total current from battery = 2+2 = 4A (currents add up in parallel)
🔬
1827

Georg Ohm established the fundamental relationship between voltage, current, and resistance — the essential building block that later made it possible to precisely calculate how series and parallel circuit combinations actually behave.

💡
1880s

As electric lighting spread into homes, early electrical engineers had to choose between series and parallel wiring for practical lighting systems — parallel wiring won out for permanent household use specifically because it let each individual light be controlled and would keep working independently, exactly the reasoning explored in Puzzle 2.

🌐
1900s-1930s

As electrical grids expanded across cities and countries, engineers developed increasingly sophisticated circuit analysis techniques (building on simple series-parallel combinations) to design and manage large, complex power distribution networks reliably.

💻
Today

Every circuit board inside a smartphone, computer, or appliance contains vast networks of resistors and other components arranged in complex series-parallel combinations — the same basic addition and reciprocal-addition rules explored in this simulation remain the essential starting point for analyzing them.