The shaded area under a P-V curve is always the work done by the gas — its shape depends entirely on which quantity is held constant during the process.
All four curves shown here are computed exactly from the ideal gas law and the first law of thermodynamics for the P₁, V₁, and V₂ you set — the numbers in the readout bar aren't pre-scripted, they follow directly from the equations above.
1 mole of a monatomic ideal gas starts at 300 K and 10⁵ Pa (24.9 litres) and expands to double the volume. The first law is Q = ΔU + W.
| Process | Work done by gas W | Change in internal energy ΔU | Heat added Q |
|---|---|---|---|
| Isothermal | 1,729 J | 0 J | 1,729 J |
| Isobaric (constant P) | 2,494 J | 3,741 J | 6,236 J |
| Adiabatic | 1,384 J | −1,384 J | 0 J |
Conditions: n = 1 mol, C_v = 1.5R, γ = 5/3, R = 8.314 J/mol·K.
Read the full guide: Thermodynamic processes compared with one gas
Puzzle 1. 📊 The AREA under a P-V curve represents work done by the gas — yet the SAME initial and final states (same starting and ending pressure/volume points) can be connected by different paths on the P-V diagram, each enclosing a different area. What does this tell you about work in thermodynamics, compared to a "state" quantity like temperature?
Puzzle 2. 🌡️ An isothermal curve and an adiabatic curve, both starting from the exact same point on a P-V diagram, always diverge — with the adiabatic curve consistently falling more steeply as volume increases. Why does this steepness difference exist, given both curves show pressure decreasing as volume increases?
Puzzle 3. 🔄 A gas undergoes a complete CYCLIC process on a P-V diagram — starting and ending at exactly the same point, tracing out a closed loop. What can you say about the total change in internal energy over this complete cycle, regardless of how complicated the specific loop's shape is?
Puzzle 4. 🎯 On a P-V diagram, a clockwise cyclic loop represents a heat engine (net positive work output), while a counter-clockwise loop of the exact same shape represents a refrigerator or heat pump (net work INPUT required). Why does simply reversing the direction of traversal completely flip this fundamental behavior?
Puzzle 5. ⚖️ An isochoric (constant volume) process appears as a perfectly VERTICAL line on a P-V diagram — pressure changing while volume stays exactly fixed. Since the area under this line (technically, a vertical line segment has essentially zero width) is zero, what does this tell you about work done during a purely isochoric process?
Problem 1 (NEET level). 📘 One mole of ideal gas expands isothermally at 300K from volume 1L to 3L. Find the work done by the gas (W=nRT ln(V₂/V₁), R=8.314 J/mol·K).
Problem 2 (JEE Main level). 📗 For the same isothermal process, find ΔU and ΔQ using the first law.
Problem 3 (WBJEE level). 📙 A gas at 100,000 Pa and volume 1L undergoes adiabatic expansion to volume 2L (γ=1.4 for a diatomic gas). Find the final pressure using P₁V₁^γ = P₂V₂^γ.
Problem 4 (CBSE Class 11 level). 📕 For the isochoric (constant volume) heating of a gas from 300K to 400K, with n=1 mole and Cv=20.8 J/mol·K, find ΔU and ΔQ.
Problem 5 (JEE Advanced style). 📓 A gas undergoes a complete cycle: isothermal expansion (absorbing 2740J heat, doing 2740J work), then isochoric cooling back to original pressure (releasing 2080J heat, zero work), then isobaric compression back to start. If the isobaric step does −660J work on the gas, find the net work done by the gas over the entire cycle.
Émile Clapeyron introduced the P-V diagram as a graphical tool for analyzing Sadi Carnot's earlier theoretical work on heat engines, providing a visual method to represent and analyze thermodynamic cycles that remains standard today.
Rudolf Clausius formalized the first law of thermodynamics mathematically, providing the essential ΔQ=ΔU+ΔW relationship that underlies every process traced on a P-V diagram — connecting the graphical representation to rigorous energy accounting.
Steam engine designers used P-V diagrams (often called "indicator diagrams," directly measured using a mechanical device attached to real engines) to analyze and optimize actual engine performance — a genuinely practical industrial application of this theoretical tool.
Modern internal combustion engine design continues to rely heavily on P-V diagram analysis of the Otto and Diesel cycles, directly using the same enclosed-area-equals-net-work principle explored in this simulation to calculate and optimize engine efficiency.
P-V diagrams remain essential for analyzing refrigeration and air-conditioning cycles (counter-clockwise loops, as explored in Puzzle 4), directly informing the engineering design of the cooling systems used in homes, vehicles, and industrial facilities worldwide.