Home / Modern Physics / Photoelectric Effect

Photoelectric Effect

NEETJEE
Photon energy: 0 eV Work function φ: 0 eV KEmax: 0 eV Stopping potential: 0 V

The physics

Each photon of light carries energy E = hf. If this exceeds the metal's work function φ, an electron is ejected with the leftover energy as kinetic energy. Below the threshold frequency, no electrons are emitted at all — no matter how intense the light is.

E = hf  (photon energy)
KEmax = hf − φ = eVs  (Einstein's photoelectric equation)
Threshold frequency f₀ = φ / h
h = 6.626 × 10⁻³⁴ J·s = 4.136 × 10⁻¹⁵ eV·s

The graph below plots stopping potential Vs against frequency f. Its slope is always h/e regardless of the metal — only the x-intercept (threshold frequency) shifts with the work function. This was Einstein's key experimental confirmation of the photon model of light.

Exam tip: NEET/JEE often give two metals or two frequencies and ask you to find h or φ from the slope/intercept of this exact Vs-f graph — try switching metals above and watching how only the intercept moves, never the slope.

Sample data: photoelectric emission from four metals

KE_max = hf − φ, with the threshold wavelength λ₀ = 1240/φ (nm, eV). The last two columns show the maximum kinetic energy for 250 nm ultraviolet light (4.96 eV photons) and for 500 nm blue-green light (2.48 eV photons).

MetalWork function φThreshold wavelengthThreshold frequencyKE_max at 250 nmKE_max at 500 nm
Caesium2.1 eV590 nm5.08×10¹⁴ Hz2.86 eV0.38 eV
Sodium2.3 eV539 nm5.56×10¹⁴ Hz2.66 eV0.18 eV
Zinc4.3 eV288 nm1.04×10¹⁵ Hz0.66 eVno emission
Copper4.7 eV264 nm1.14×10¹⁵ Hz0.26 eVno emission

Conditions: approximate work functions (they vary with surface condition), hc = 1240 eV·nm, h = 6.626×10⁻³⁴ J·s.

Notice: 500 nm (blue-green) light liberates electrons from caesium and sodium but not from zinc or copper, however bright it is, because each photon (2.48 eV) is smaller than their work functions. Making the 250 nm light brighter would increase the number of emitted electrons but not their maximum energy, which depends only on the frequency.

Quick answers

What is Einstein's photoelectric equation?
hf = φ + KE_max, where φ is the work function of the metal. Also KE_max = eV₀, where V₀ is the stopping potential.
What is threshold frequency?
The minimum frequency of light that can eject electrons from a metal, f₀ = φ/h. Below it, no emission occurs however intense the light is.
What does the intensity of light change?
The number of photons per second, so it changes the photocurrent. It does not change the maximum kinetic energy of the electrons, which depends only on frequency.
What does the slope of the V₀-f graph give?
The slope equals h/e, so Planck's constant can be found from it. The intercept on the frequency axis is the threshold frequency.

Read the full guide: Photoelectric effect explained

🎯 Practice Zone

Puzzle 1. 🔆 You double the intensity of light shining on a metal, keeping the frequency fixed above threshold. The number of photoelectrons emitted per second doubles too — but their maximum kinetic energy stays exactly the same. Why doesn't more intense light give each electron more energy?

Intensity is about the number of photons arriving per second, not the energy of each individual photon. Each photon still carries E=hf, unchanged by intensity. Since one photon ejects one electron (the interaction is one-to-one, not cumulative), doubling the photon count just doubles how many electrons get ejected — each one still receiving the same hf−φ of kinetic energy as before.

Puzzle 2. ⏳ Classical wave theory predicted that dim light below the threshold frequency should still eventually eject electrons, if you just wait long enough for enough energy to "add up" on the metal surface. Experimentally, this never happens — not even after hours. Why not?

Energy doesn't accumulate gradually on an atomic scale the way classical waves suggested. Each photon interacts with (at most) a single electron in one discrete event — either that one photon has enough energy (hf ≥ φ) to eject the electron immediately, or it doesn't and nothing happens, regardless of how many other photons arrive elsewhere. There's no mechanism for photons to "pool" their energy onto one electron.

Puzzle 3. 🔩 Metal A has a smaller work function than Metal B. Which one has a longer threshold wavelength — the maximum wavelength of light that can still eject electrons?

Metal A (smaller work function) has the longer threshold wavelength. Since φ=hc/λ₀, a smaller φ means a larger λ₀ — less energy is needed per photon, so even longer-wavelength (lower-energy) photons can still do the job. This is why alkali metals (very low work function) respond to visible or even infrared light, while most metals need ultraviolet.

Puzzle 4. ⚡ The photoelectric current (number of electrons per second) is directly proportional to light intensity — but is NOT proportional to frequency at all, as long as frequency stays above threshold. Why does frequency not affect the current?

Current depends on how many electrons are ejected per second, which depends on how many photons arrive per second — that's intensity, not frequency. Frequency only determines how much kinetic energy each ejected electron carries (via KEmax=hf−φ), not whether an electron gets ejected in the first place (as long as hf>φ). Two beams of the same intensity but different frequencies (both above threshold) eject the same number of electrons per second, just with different energies.

Puzzle 5. 🕳️ Could a metal with a hypothetical negative work function exist, where every possible frequency of light — even f=0 — ejects electrons?

No — physically, work function is always positive because electrons are genuinely bound inside a metal by attractive forces from the positive ion lattice; removing one always costs energy. A "negative work function" would mean electrons spontaneously fly out of the metal with no light at all, which isn't observed and would violate energy conservation for a stable material. Real work functions range roughly from about 2 eV (alkali metals like caesium) to around 5-6 eV (metals like platinum).

Problem 1 (NEET level). 📘 Light of frequency 8×10¹⁴ Hz falls on a metal with work function 2.3 eV. Find the maximum kinetic energy of the emitted photoelectrons, in eV.

E_photon = hf = (4.136×10⁻¹⁵ eV·s)(8×10¹⁴ Hz) = 3.31 eV
KEmax = E_photon − φ = 3.31 − 2.3 = 1.01 eV

Problem 2 (JEE Main level). 📗 The stopping potential for photoelectrons from a certain metal is measured as 1.8 V. Find the maximum speed of the emitted electrons. (m_e = 9.11×10⁻³¹ kg)

KEmax = eVs = (1.6×10⁻¹⁹ C)(1.8 V) = 2.88×10⁻¹⁹ J
½mv² = KEmax → v = √(2·KEmax/m)
v = √(2 × 2.88×10⁻¹⁹ / 9.11×10⁻³¹) = 7.95×10⁵ m/s

Problem 3 (WBJEE level). 📙 The threshold wavelength for a metal surface is 330 nm. Calculate its work function in eV.

φ = hc/λ₀ = (4.136×10⁻¹⁵ eV·s)(3×10⁸ m/s) / (330×10⁻⁹ m)
φ = 3.76 eV

Problem 4 (CBSE Class 12 level). 📕 Metal A has work function 2.1 eV and Metal B has work function 4.5 eV. Which metal has the higher threshold frequency, and what are the two threshold frequencies?

f₀ = φ/h (using h = 6.626×10⁻³⁴ J·s and φ converted to joules)
Metal A: f₀ = 5.07×10¹⁴ Hz
Metal B: f₀ = 1.09×10¹⁵ Hz
Metal B has the higher threshold frequency — a larger work function always needs a higher-energy (higher-frequency) photon to eject an electron.

Problem 5 (JEE Advanced style — combined concept). 📓 A photon of energy 5 eV strikes a metal with work function 2 eV. Find the maximum kinetic energy of the ejected electron, then find its de Broglie wavelength.

KEmax = 5 − 2 = 3 eV = 4.8×10⁻¹⁹ J
p = √(2m·KEmax) = √(2 × 9.11×10⁻³¹ × 4.8×10⁻¹⁹) = 9.35×10⁻²⁵ kg·m/s
λ = h/p = 6.626×10⁻³⁴ / 9.35×10⁻²⁵ = 0.709 nm

This combines two "dual nature" ideas in one problem — a very common JEE Advanced pattern: use the photoelectric equation first to get KE, then treat that same electron as a matter wave via de Broglie's relation.

⚡
1887

Heinrich Hertz stumbles onto the photoelectric effect completely by accident, while running experiments that confirmed Maxwell's electromagnetic wave theory — he noticed that UV light striking a spark-gap electrode made sparking easier, though he never followed up on why.

🔬
1899–1902

Philipp Lenard studies the effect carefully and finds something wave theory cannot explain at all: the ejected electrons' energy depends only on light's frequency, never on its intensity — a deeply puzzling result for the physics of the time.

🌡️
1900

Max Planck introduces the revolutionary idea that energy comes in discrete packets (quanta), E=hf, to solve a completely different problem — blackbody radiation. He didn't yet connect it to the photoelectric puzzle.

💡
1905

Albert Einstein, in his "miracle year," boldly extends Planck's quantum idea further than Planck himself was comfortable with — proposing that light itself travels as discrete particles (photons), each with energy hf. This single idea instantly explains every puzzling feature of the photoelectric effect.

🎯
1916

Robert Millikan spends nearly a decade trying to experimentally disprove Einstein's "reckless" photon hypothesis — and instead ends up confirming Einstein's equation with remarkable precision, even extracting an accurate value of Planck's constant h from his own data.

🏆
1921

Einstein wins the Nobel Prize in Physics — specifically "for his discovery of the law of the photoelectric effect," not for relativity, which was still considered too controversial by the Nobel committee at the time. A little-known fact many students find surprising.