Home / Electricity & Magnetism / Force Between Parallel Wires

Force Between Two Parallel Wires

JEEWBJEE
Force per length: 0 N/m —

The physics

Each current-carrying wire creates a magnetic field, and that field exerts a force on the other wire's moving charges. Wires carrying current in the same direction attract; opposite directions repel — the reverse of what many people intuitively guess.

Force per unit length: F/L = μ₀I₁I₂ / (2πd)
Same direction currents → attract   Opposite direction currents → repel

This exact formula, evaluated at I₁=I₂=1A and d=1m, historically defined what "1 ampere" meant — before 2019, the ampere's definition was literally built around this force being exactly 2×10⁻⁷ N per metre.

Exam tip: a common JEE/WBJEE trap reverses the intuition from bar magnets — parallel wires with current in the same direction attract (unlike magnetic poles, where "same" would repel); this is a frequently memorized-backward fact.

Sample data: force per metre between two long parallel wires

F/L = μ₀I₁I₂/(2πd). Currents in the same direction attract, opposite directions repel.

Current 1Current 2Separation dForce per metre
1 A1 A1 m2e-07 N/m
1 A1 A0.5 m4e-07 N/m
10 A10 A0.1 m0.0002 N/m
100 A100 A0.1 m0.02 N/m
1000 A1000 A1 m0.2 N/m

Conditions: infinitely long straight wires in air; μ₀ = 4π×10⁻⁷ T m/A.

Notice: two wires with 1 A each, 1 m apart, attract with only 2×10⁻⁷ N per metre, a force you could not feel. Until the 2019 SI revision, the ampere was defined by exactly this force. Raise the currents to 1000 A and it grows to 0.2 N per metre, which is why bus-bars in power stations are braced hard.

🎯 Practice Zone

Puzzle 1. ➕➕ Two parallel wires carrying current in the SAME direction genuinely attract each other, just like two like-charged objects would repel — a seemingly backward pattern from electric charges. Walking through the actual physics step by step, why does this specific attraction occur?

Each wire creates a circular magnetic field around itself (per the right-hand rule); at the SECOND wire's location, this field points in a specific direction determined by the geometry. Applying the force law F=IL×B to the second wire's own current in this external field (again via the right-hand rule) reveals the resulting force direction — working through this two-step process rigorously (not just pattern-matching to electric charge intuition) shows that same-direction currents genuinely produce mutual attraction. This is real electromagnetic physics, verified by both theory and direct experiment — the "backward from magnets" feeling is simply because current-current interaction is a fundamentally different physical mechanism from pole-pole interaction, not because either calculation is wrong.

Puzzle 2. ⚡ High-current busbars in electrical substations and power plants must be mechanically braced and secured, specifically because of the force between parallel current-carrying conductors — not just because of their weight. Why does electrical engineering specifically need to account for this magnetic force in physical structural design?

During very high current conditions (especially short-circuit fault currents, which can be thousands of amperes) the force between nearby parallel conductors — proportional to the PRODUCT of the two currents — can become genuinely enormous, potentially strong enough to mechanically bend or even destroy busbars and connecting hardware if they're not properly braced. This is a real, serious engineering safety consideration, distinct from simply supporting the conductors' own weight, and is precisely why substation and switchgear design includes calculations for these fault-current-induced mechanical forces, not just normal operating currents.

Puzzle 3. 📏 The force between two parallel wires depends on the PRODUCT of their two currents (I₁×I₂), not their sum. Why does this specific multiplicative relationship matter for understanding how force scales when currents change?

This multiplicative dependence has a genuinely important practical consequence: doubling BOTH currents simultaneously doesn't just double the force — it QUADRUPLES it (since (2I₁)(2I₂)=4I₁I₂). This is directly analogous to how doubling both the radius and height of a cylinder doesn't just double its volume — multiplicative relationships between two independently-varying quantities always produce this kind of amplified scaling when both quantities change together, a pattern worth recognizing whenever a physics formula has a product of two variables rather than either alone.

Puzzle 4. 🔌 Standard household electrical wiring runs the "hot" and "neutral" wires very close together (often in the same cable sheath), carrying current in OPPOSITE directions (current flows out through one, back through the other). Given the repulsive force between opposite-direction currents, is this a genuine safety or mechanical concern in ordinary household wiring?

No, not in any practically meaningful sense — ordinary household currents (typically just a few amperes) produce genuinely tiny forces per unit length (recall from earlier calculation: even 5A wires 5cm apart experience only about 100 micronewtons per meter, an utterly negligible force compared to the wire's own weight or the cable's structural integrity). This repulsive force between opposite-direction currents only becomes practically significant at MUCH higher currents (hundreds or thousands of amperes, as in industrial power distribution or short-circuit fault conditions), which is precisely why this force matters for substation busbar design (Puzzle 2) but is completely irrelevant for ordinary household wiring.

Puzzle 5. ⚖️ The formula for force between parallel wires (F/L=μ₀I₁I₂/2πd) contains no reference to the wires' material, thickness, or any property other than current and separation distance. Why doesn't the specific type of wire (copper, aluminum, etc.) or its thickness affect this magnetic force at all?

The magnetic force between the wires depends entirely on the magnetic FIELDS each wire creates and how those fields interact with the OTHER wire's current — and a wire's magnetic field (for a given current) depends only on that current value and geometric distance, completely independent of what material the wire is made from or how thick it is (as long as we're considering the field outside the wire, which is the relevant region here). Wire material and thickness certainly matter for OTHER properties (electrical resistance, how much current the wire can safely carry, heat dissipation) — but the magnetic force calculation itself, once the current is established, depends only on the current values and their spatial separation.

Problem 1 (NEET level). 📘 Find the force per unit length between two parallel wires, each carrying 5A, separated by 5cm.

F/L = μ₀I₁I₂/(2πd) = (4π×10⁻⁷)(5)(5)/(2π×0.05)
F/L = 100 μN/m

Problem 2 (JEE Main level). 📗 Find the total force on a 2m length of one of these wires.

F = (F/L) × L = (100×10⁻⁶)(2)
F = 200 μN

Problem 3 (WBJEE level). 📙 Verify the historical exact ampere definition: find F/L for two 1A wires separated by exactly 1m.

F/L = μ₀(1)(1)/(2π×1) = (4π×10⁻⁷)/(2π)
F/L = 2×10⁻⁷ N/m — exactly matching the historical (pre-2019) SI definition of the ampere

Problem 4 (CBSE Class 12 level). 📕 Find the new force per unit length if BOTH currents from Problem 1 are doubled (to 10A each), keeping the same 5cm separation.

F/L = μ₀(10)(10)/(2π×0.05)
F/L = 400 μN/m — exactly 4× the original 100μN/m, confirming Puzzle 3's prediction that doubling both currents quadruples the force

Problem 5 (JEE Advanced style). 📓 A substation busbar carries a 20,000A short-circuit fault current, with a parallel busbar 0.3m away carrying the same fault current. Find the resulting force per unit length, and compare it to Problem 1's household-scale result.

F/L = μ₀(20000)(20000)/(2π×0.3)
F/L = 266.7 N/m (267 newtons per meter!)
This is roughly 2.67 million times larger than Problem 1's 100μN/m household-scale result — a dramatic, genuinely dangerous force that vividly illustrates why substation busbars require serious mechanical bracing (per Puzzle 2), unlike ordinary household wiring.
🔬
1820

André-Marie Ampère discovers and rigorously quantifies the force between parallel current-carrying wires, shortly after Ørsted's discovery of the current-magnetism connection — establishing one of the foundational quantitative laws of electrodynamics.

📏
1893–1948

International conferences progressively formalize electrical units, eventually adopting a definition of the ampere based directly on this exact force-between-parallel-wires relationship — a definition considered elegant because it connected an electrical unit directly to mechanical force, mass, and length measurements.

🏭
Early-to-mid 1900s

As electrical power distribution scales up dramatically, engineers increasingly must account for parallel-conductor forces in substation and switchgear design — particularly for short-circuit fault conditions, where currents (and resulting forces) can be many thousands of times larger than normal operation.

⚛️
2019

The SI system officially redefines the ampere in terms of a fixed, exact numerical value for elementary electric charge, rather than the historical force-between-wires definition — though the underlying physics (and the historical significance of this exact relationship) remains unchanged and pedagogically important.

🔌
Present day

Force calculations between parallel conductors remain essential to power system engineering, particularly for fault-current analysis and busbar structural design in high-power electrical installations, a direct practical legacy of Ampère's original 1820 discovery.