Ohm's law says current through a conductor is directly proportional to voltage, at constant temperature — giving a straight-line V-I graph through the origin. Not every device obeys this; a diode's current rises non-linearly (exponentially) with forward voltage.
Both curves are plotted from genuine physics — the resistor from V=IR directly, the diode from the same Shockley-equation model used in this site's dedicated p-n junction simulation.
A 10 Ω resistor obeys V = IR. The diode follows I = I₀(e^(V/nV_T) − 1) with the values below, so its resistance V/I changes at each point.
| Voltage | Resistor current | Resistor R = V/I | Diode current | Diode R = V/I |
|---|---|---|---|---|
| 0.2 V | 20 mA | 10 Ω | 4.58×10⁻¹¹ A | 4.37×10⁹ Ω |
| 0.4 V | 40 mA | 10 Ω | 2.19×10⁻⁹ A | 1.83×10⁸ Ω |
| 0.6 V | 60 mA | 10 Ω | 1.03×10⁻⁷ A | 5.85×10⁶ Ω |
| 0.8 V | 80 mA | 10 Ω | 4.80×10⁻⁶ A | 1.67×10⁵ Ω |
| 1.0 V | 100 mA | 10 Ω | 2.25×10⁻⁴ A | 4.45×10³ Ω |
Conditions: I₀ = 10⁻¹² A, n = 2, V_T = 0.026 V (assumed silicon-diode parameters).
Read the full guide: Current electricity: Ohm's law, resistivity and Kirchhoff's laws
Puzzle 1. 📈 An ordinary resistor's V-I graph is a perfectly straight line through the origin, while a diode's V-I graph is dramatically curved. What specifically makes a device "ohmic" versus "non-ohmic," and why does this distinction matter beyond just the graph's shape?
Puzzle 2. 💡 A light bulb's filament is technically non-ohmic — its resistance measurably increases as it heats up under higher current. Why does this specific behavior mean a bulb's V-I graph curves in a particular direction (concave, bending toward the voltage axis) rather than the opposite?
Puzzle 3. ⚡ At a single point on a curved (non-ohmic) V-I graph, there are two meaningfully different "resistance" values you could calculate: the static resistance (V/I, a straight line from origin to that point) and the dynamic resistance (dV/dI, the local tangent slope). Why do these give genuinely different numbers, and when does each one matter?
Puzzle 4. 🌡️ A metal resistor's resistance increases with temperature, while a semiconductor's resistance typically DECREASES with temperature — genuinely opposite behaviors. How does this difference manifest if you plotted the same device's V-I curve at two different fixed temperatures?
Puzzle 5. 🔋 If you reverse the voltage polarity across an ordinary resistor, the V-I graph simply extends symmetrically into the third quadrant (negative V, negative I) — but a diode's reverse-bias behavior looks nothing like a mirror image of its forward behavior. What does this asymmetry tell you about the diode's underlying physics?
Problem 1 (NEET level). 📘 A resistor's V-I graph is a straight line passing through (0,0) and (10V, 2A). Find its resistance.
Problem 2 (JEE Main level). 📗 A non-ohmic device has V=1V, I=0.1A at one point on its curve. Find the static resistance at that specific point.
Problem 3 (WBJEE level). 📙 At a different point on the same non-ohmic device's curve, V=2V and I=0.5A. Find the static resistance here, and confirm this device is indeed non-ohmic.
Problem 4 (CBSE Class 12 level). 📕 For an ohmic resistor with R=5Ω, find the current at V=15V and V=25V, and verify the V-I graph's slope stays constant between these two points.
Problem 5 (JEE Advanced style). 📓 A diode's current follows I=I₀(e^(V/0.026)−1) with I₀=1nA. Find the dynamic resistance (dV/dI) at V=0.6V, using the approximation dV/dI ≈ 0.026/I at that operating point (a standard diode small-signal result).
Georg Ohm publishes his systematic experimental study establishing that current through a conductor is proportional to applied voltage — initially dismissed by much of the German scientific establishment, but eventually recognized as one of the most foundational relationships in electrical science.
As electrical engineering matures into a rigorous discipline, systematically plotting V-I characteristic curves becomes a standard laboratory technique for characterizing new electrical components — distinguishing well-behaved ohmic conductors from more complex non-linear devices.
The invention of the transistor and rapid development of semiconductor diodes at Bell Labs makes understanding non-ohmic V-I behavior genuinely essential — these devices' characteristic curves became fundamental design tools for the emerging field of solid-state electronics.
V-I curve analysis remains a standard diagnostic and design tool across electrical engineering — from testing whether a component is functioning correctly, to designing amplifier circuits around a semiconductor's precise dynamic resistance at a chosen operating point.