Home / Electricity & Magnetism / Effects of Electric Current

Electric Current: Heating & Magnetic Effects

Class 7CBSE
Switch open — no effects

The physics

Flowing electric current produces two easily observed effects: it heats up the conductor it flows through (used in heaters, geysers, incandescent bulbs), and it creates a magnetic field around the wire (used in electromagnets, motors, and speakers).

Heating effect: more current or higher resistance → more heat produced
Magnetic effect (Oersted's discovery): any current-carrying wire deflects a nearby compass needle

Oersted noticed this magnetic effect completely by accident during a lecture demonstration in 1820, when a compass needle near his circuit twitched as he switched the current on — a discovery that eventually led to electric motors and generators.

Exam tip: a common Class 7 question asks to name devices that use each effect — heating effect: electric iron, heater, bulb filament; magnetic effect: electric bell, electromagnet, electric motor. Keep the two lists separate in your mind.

Sample data: heating and magnetic effect of a current

Heat produced per second is P = I²R. The magnetic field a distance r from a long straight wire is B = μ₀I/(2πr).

Current IHeating power in a 10 Ω wireHeat in 1 minuteField at 1 cm from the wire
0.5 A2.5 W0.15 kJ10 μT
1 A10.0 W0.60 kJ20 μT
2 A40.0 W2.40 kJ40 μT
3 A90.0 W5.40 kJ60 μT

Conditions: resistance 10 Ω, long straight wire in air, field measured at r = 1 cm.

Notice: doubling the current from 1 A to 2 A makes the heating four times larger (10 W to 40 W) but the magnetic field only twice as large (20 μT to 40 μT). The heating effect depends on I², the magnetic effect on I.

🔍 Explore More!

Think About It 1. 🔥 Why does an electric heater's coiled wire glow red-hot when current flows through it, while the thicker copper wires bringing electricity to your house barely get warm at all, carrying the very same kind of electric current?

A heater's coil is deliberately made from a thin, special wire (often nichrome) that strongly resists the flow of electric current — this resistance forces electrical energy to convert into heat energy as the current struggles to push through, exactly like rubbing your hands together creates heat through friction. The thick copper wires bringing electricity into your house are specifically chosen because they have very LOW resistance, letting current flow through them easily without generating much heat at all — this is a deliberate, important design choice, since we generally don't want ordinary household wiring to heat up!

Think About It 2. 🧲 A simple coil of wire, wound around a nail, becomes a real (if weak) magnet the moment electric current flows through it — yet the exact same coil with no current flowing has no magnetic pull at all. How can turning electricity on and off actually create and destroy magnetism?

Moving electric charge (which is exactly what current is) always creates a magnetic field around it — this was actually a completely accidental discovery, made when a scientist noticed a nearby compass needle twitching whenever he switched a circuit on. Winding the wire into a tight coil around an iron nail concentrates and strengthens this magnetic effect dramatically, turning the nail into a genuine (if temporary) electromagnet. The moment you switch the current off, there's no more moving charge to create that magnetic field, and the magnetism simply disappears — this instant on/off control is exactly why electromagnets are so useful in countless devices.

Think About It 3. 💡 An old-fashioned incandescent light bulb actually produces light as a SIDE EFFECT of the heating effect of electric current — the tiny wire filament inside gets so hot it glows brightly. Does this mean an old-style bulb is really working more like a tiny, specialized heater than a dedicated "light" device?

In an important sense, yes — an old incandescent bulb genuinely relies entirely on the heating effect of current to produce light, heating its thin metal filament to an extremely high temperature until it glows (a phenomenon called "incandescence"). This actually explains why old-style bulbs feel warm or even hot to the touch, and why they waste a lot of electrical energy as unwanted heat rather than useful light — this is exactly why modern LED bulbs (which produce light through a completely different, much more efficient process) have largely replaced old incandescent bulbs, since they don't rely on wastefully heating a filament at all.

Think About It 4. ⚡ An electric fuse, a thin piece of wire deliberately designed to melt and break a circuit if too much current flows, is a genuinely important safety device found in most homes. Which effect of electric current — heating or magnetic — is this fuse actually relying on?

The heating effect! A fuse is deliberately made from a wire with a carefully chosen thickness and material that will heat up and melt if the current flowing through it becomes dangerously large — once it melts, the circuit breaks completely, automatically cutting off the excessive current before it can cause a fire or damage your home's other electrical devices. This is a genuinely clever, purely physical safety mechanism, relying entirely on the same heating effect that makes an electric heater's coil glow — just intentionally pushed to the point of actually melting the wire, as a deliberate protective feature.

Think About It 5. 🚪 Electric doorbells often use a small electromagnet to physically strike a metal bell or chime when you press the button. Why use an electromagnet for this job, rather than some other kind of mechanism?

An electromagnet gives a doorbell a genuinely convenient, instant, and controllable way to convert electrical energy into a quick physical motion — pressing the button completes the circuit, the electromagnet instantly attracts a small metal striker toward it, and this striker hits the bell to make a sound. The moment you release the button, the electromagnet loses its magnetism immediately, and the striker can spring back, ready to strike again. This clean, simple, and instantly-controllable behavior — turning magnetism on and off exactly when needed — is exactly why electromagnets show up in so many everyday devices, from doorbells to electric locks.

Try It 1 (Class 7 level). ✏️ Sort these devices into "mainly uses the heating effect" or "mainly uses the magnetic effect": electric iron, electric bell, room heater, electromagnet crane, toaster.

Heating effect: electric iron, room heater, toaster
Magnetic effect: electric bell, electromagnet crane

Try It 2 (Class 7-8 level). ✏️ A current of 2A flows through a heating coil with resistance 5Ω. Find the heating power produced (Power = I² × R).

Power = I² × R = 2² × 5 = 4 × 5
Power = 20 Watts

Try It 3 (Class 7 level). ✏️ If you double the current flowing through the same heating coil (to 4A), does the heating power double, or increase by some other factor?

New power = 4² × 5 = 16 × 5 = 80 Watts
This is 4 times the original 20W, not just double — because power depends on current SQUARED, doubling the current quadruples the heating power!

Try It 4 (Class 7 level). ✏️ A coil of wire wrapped around an iron nail is connected to a battery, and it successfully picks up small paper clips. What happens to the paper clips the instant you disconnect the battery?

The paper clips fall off immediately — without current flowing, there's no more magnetic field, so the temporary electromagnet loses its magnetism completely

Try It 5 (Class 8 level). ✏️ A household fuse is rated to melt and break the circuit at 5A. If a fault causes 8A to try to flow through it, what will happen?

The fuse will heat up and melt, breaking the circuit — since 8A exceeds its 5A rating, the heating effect of this excess current is exactly what triggers the fuse to do its safety job
🧭
1820

Danish scientist Hans Christian Ørsted was giving a lecture demonstration when he noticed, completely by accident, that a nearby compass needle twitched whenever he switched an electric current on and off. This surprising, unplanned observation revealed for the very first time that electricity and magnetism were secretly connected — one of the most important accidental discoveries in the history of physics!

🔥
1840s

English scientist James Prescott Joule carefully measured exactly how much heat electric current produces as it flows through a wire, discovering the precise mathematical relationship (Power = I²R) still used today to calculate electrical heating — a discovery now called "Joule heating" in his honor.

💡
1879

Thomas Edison perfected a practical, long-lasting light bulb by finding just the right filament material and design — directly exploiting the heating effect of current, deliberately making a thin wire glow bright enough to usefully light a room without burning out too quickly.

🏠
Today

Both effects discovered so long ago remain everywhere in modern life — the heating effect powers toasters, kettles, and hair dryers, while the magnetic effect drives electric motors, speakers, and doorbells — Ørsted's accidental 1820 discovery and Joule's careful 1840s measurements together shaped an enormous amount of the technology we now use every single day.