Home / Electricity & Magnetism / Drift Velocity

Drift Velocity & Mobility

NEETJEE
Drift velocity: 0 mm/s Free electron density n: 8.5×10²⁸ /m³

The physics

Free electrons in a metal move randomly at high speeds in all directions due to thermal motion — but when a field is applied, they gain a tiny net "drift" velocity in one direction, which is what actually constitutes electric current.

Current: I = nAv_d e  so  v_d = I / (nAe)
Mobility: μ = v_d / E  (drift velocity per unit field)
n (copper) ≈ 8.5 × 10²⁸ free electrons per m³

This simulation computes the real drift velocity for your chosen current and wire thickness, using copper's actual free-electron density — the animated electron speed on screen is scaled up enormously just so you can see it move at all.

Exam tip: a common NEET/JEE question asks why increasing the wire's cross-sectional area decreases drift velocity for the same current — since v_d = I/(nAe), a larger A spreads the same current over more electrons, so each one needs to drift more slowly.

Sample data: how slowly electrons really drift in copper

Drift velocity is v = I/(nAe). For copper n ≈ 8.5×10²⁸ free electrons per m³.

CurrentCross-sectionDrift speedTime for one electron to travel 1 m
0.5 A1 mm²0.037 mm/s7.6 h
1 A1 mm²0.073 mm/s3.8 h
5 A1 mm²0.367 mm/s0.8 h
10 A2.5 mm²0.294 mm/s0.9 h
15 A2.5 mm²0.441 mm/s0.6 h
10 A0.5 mm²1.469 mm/s0.2 h

Conditions: n = 8.5×10²⁸ m⁻³, e = 1.602×10⁻¹⁹ C. Copper at room temperature.

Notice: a 1 A current in a 1 mm² copper wire has a drift speed of about 0.07 mm/s, so one electron needs close to four hours to travel one metre. The lamp still lights instantly because the electric field travels through the wire at a large fraction of the speed of light and moves all the free electrons together, no electron has to travel from the switch to the bulb.

Quick answers

What is the formula for drift velocity?
v_d = I / (n A e), where n is the number of free electrons per unit volume, A the cross-section area and e = 1.6 × 10⁻¹⁹ C.
How large is the drift velocity in a copper wire?
Very small. For I = 1 A in a 1 mm² copper wire (n ≈ 8.5 × 10²⁸ m⁻³), v_d ≈ 7.4 × 10⁻⁵ m/s, less than a tenth of a millimetre per second.
Then why does a bulb light up at once?
The electric field is set up along the wire almost at the speed of light, and every free electron starts drifting together. The electrons themselves move slowly.
What is mobility?
Mobility μ = v_d / E, the drift velocity per unit electric field. Its SI unit is m²/V s.

🎯 Practice Zone

Puzzle 1. 💡 When you flip a light switch, the bulb lights up almost instantly, even though individual electrons in the wire are actually drifting at an incredibly slow speed — often less than a millimetre per second. How can the light respond so quickly if the electrons themselves crawl along so slowly?

What travels through the wire almost instantly isn't any individual electron making the full journey from switch to bulb — it's the ELECTRIC FIELD itself, which propagates through the wire at a substantial fraction of the speed of light. This field essentially "pushes" on all the electrons throughout the entire wire nearly simultaneously, causing every electron already present in the filament to begin drifting almost immediately, even though each individual electron's own drift speed remains extremely slow. It's genuinely analogous to a very long, already-full pipe of water — pushing water in at one end causes water to immediately flow out the other end, even though any single water molecule travels the pipe's length only very slowly.

Puzzle 2. ⚡ Free electrons inside a metal wire are actually moving at enormous random thermal speeds (roughly 10⁵-10⁶ m/s) even with zero current flowing at all — yet the drift velocity when current DOES flow is astonishingly slower, often under a millimetre per second. How can the net drift be so much slower than each electron's own actual speed?

Without an applied electric field, electrons genuinely do zip around at very high random thermal speeds, but in completely random directions — constantly colliding with the metal's atomic lattice and scattering off in new random directions, resulting in zero NET displacement over time (they wander but don't systematically progress anywhere). When a field is applied, it adds only a tiny, consistent directional "bias" on top of this chaotic thermal motion — each electron's actual path remains a mostly-random zigzag, just with a very slight overall net drift superimposed in the field's direction. The drift velocity we calculate is this tiny average net progress, dwarfed by the much larger but directionally-cancelling thermal speed.

Puzzle 3. 🔌 A thick wire and a thin wire made of the same metal, carrying the exact same current, have noticeably different drift velocities — the thin wire's electrons must drift proportionally faster. Why does wire thickness specifically affect how fast individual electrons need to move for a given current?

Current is fundamentally about how much CHARGE passes a given cross-section per second — and this depends on both how many charge carriers are available (proportional to cross-sectional area, since more area means more electrons packed into that slice) AND how fast each one drifts. For the same current in a thinner wire (smaller area, fewer available electrons in that cross-section), each individual electron must drift proportionally faster to make up for having fewer "helpers" contributing to the same total charge flow — this inverse relationship (v_d ∝ 1/A) is exactly why household wiring uses appropriately thick wires for higher-current circuits, partly to keep drift velocities (and resulting heating) reasonable.

Puzzle 4. 🧲 Silver has a slightly lower free-electron density than copper, yet silver is actually a slightly BETTER electrical conductor than copper overall. Given that drift velocity depends inversely on electron density, how do these two facts fit together consistently?

Overall conductivity depends on multiple factors working together — not just electron density (n), but also how easily each electron can move through the material (related to the mean time between collisions, τ, which reflects the metal's specific crystal structure and purity). Silver's slightly LOWER electron density would, all else being equal, actually tend to require a slightly HIGHER drift velocity for the same current — but silver's electrons experience even less resistance to their motion (a longer mean free time between scattering collisions) than copper's, more than compensating and giving silver its overall superior conductivity. This illustrates that drift velocity and overall conductivity, while related, aren't simply determined by electron density alone.

Puzzle 5. 🌡️ Heating a metal wire increases its electrical resistance, yet the free-electron density (n) inside the metal stays essentially unchanged with temperature. If more electrons aren't being added or removed, what's actually changing to increase resistance as temperature rises?

As temperature rises, the metal's atomic lattice vibrates more vigorously, causing electrons to collide and scatter MORE FREQUENTLY as they attempt to drift through the material — this shortens the mean time between collisions (τ), directly reducing each electron's average drift velocity for a given applied field, which is precisely what we experience macroscopically as increased electrical resistance. The number of available charge carriers (n) genuinely stays essentially constant with temperature for an ordinary metal — it's specifically the increased scattering frequency (shorter τ) that's responsible for a metal's characteristic resistance increase with temperature, not any change in electron population.

Problem 1 (NEET level). 📘 A copper wire (free electron density n=8.5×10²⁸ /m³) carries 5A of current through cross-sectional area 1×10⁻⁶ m². Find the drift velocity.

v_d = I/(nAe) = 5/[(8.5×10²⁸)(1×10⁻⁶)(1.6×10⁻¹⁹)]
v_d = 3.68×10⁻⁴ m/s (about 0.37 mm/s — remarkably slow!)

Problem 2 (JEE Main level). 📗 The same wire's cross-sectional area is doubled (to 2×10⁻⁶ m²), keeping the same 5A current. Find the new drift velocity, and verify the inverse relationship with area.

v_d = 5/[(8.5×10²⁸)(2×10⁻⁶)(1.6×10⁻¹⁹)]
v_d = 1.84×10⁻⁴ m/s — exactly half of Problem 1's result, confirming v_d ∝ 1/A

Problem 3 (WBJEE level). 📙 Find the current flowing through a wire of area 2×10⁻⁶ m² (same copper) if the drift velocity is measured at 1×10⁻⁴ m/s.

I = nAev_d = (8.5×10²⁸)(2×10⁻⁶)(1.6×10⁻¹⁹)(1×10⁻⁴)
I = 2.72 A

Problem 4 (CBSE Class 12 level). 📕 Typical thermal (random) electron speeds in a metal are of order 10⁵ m/s. Compare this to the drift velocity from Problem 1, finding the ratio.

Ratio = thermal speed / drift speed = (1×10⁵)/(3.68×10⁻⁴)
Ratio ≈ 2.7×10⁸ (270 million times faster) — vividly illustrating just how much larger random thermal motion is compared to the tiny net drift responsible for current flow

Problem 5 (JEE Advanced style). 📓 A wire carries 2A through area 1×10⁻⁶ m² and takes 500 seconds for an electron to drift 1cm along the wire (a simplified estimate). Verify this is roughly consistent with the calculated drift velocity for this current and area (using copper's electron density).

Calculated: v_d = I/(nAe) = 2/[(8.5×10²⁸)(1×10⁻⁶)(1.6×10⁻¹⁹)] = 1.47×10⁻⁴ m/s
Time to drift 1cm = 0.01/(1.47×10⁻⁴) = 68 seconds (not quite 500s, but same order of magnitude) — confirming that even a short 1cm drift genuinely takes on the order of a minute, a striking illustration of how slow actual electron drift really is compared to the near-instant response of the circuit itself.
⚡
1897

J.J. Thomson discovers the electron, providing the first direct evidence for the tiny, negatively-charged particles that would later be understood as the primary charge carriers responsible for electric current in metals.

🔬
1900

Paul Drude develops the first quantitative model treating free electrons in a metal like a classical gas of particles, deriving early relationships between electron motion, applied fields, and electrical conductivity — an important, if ultimately simplified, foundational framework.

📐
1920s-1930s

The development of quantum mechanics substantially refines Drude's classical model, correctly accounting for quantum statistical effects on electron behavior in metals — while the basic drift velocity concept and formula (v_d=I/nAe) established in this earlier era remains accurate and widely taught.

💻
Present day

Understanding drift velocity remains essential in modern semiconductor device design and integrated circuit engineering, where controlling electron and hole drift behavior at extremely small scales is fundamental to how transistors and microchips actually function.