A guitar string, a sitar wire and the sonometer wire in your physics lab all work on the same idea: a string fixed at both ends can vibrate only at certain special frequencies. Those frequencies are the harmonics, and the pattern on the string is a standing wave. Once you know the one formula and the node-antinode picture, string numericals become routine.

A string fixed at both ends vibrates in whole numbers of loops: 1, 2, 3 and so on

How a standing wave forms

When a wave travels along a string and reflects from the fixed end, the reflected wave interferes with the incoming wave. For most frequencies this gives a messy pattern. But at certain frequencies the two waves fit together so that some points never move (nodes) and others move with the maximum amplitude (antinodes). The ends are always nodes, since they are fixed.

Harmonics of a string fixed at both ends

For a string of length L, the allowed wavelengths satisfy L = nλ/2, where n = 1, 2, 3, ... is the number of loops. The speed of a transverse wave on the string depends on the tension T and the mass per unit length μ:

v = √(T / μ)   |   fn = n v / (2L) = (n / 2L) √(T / μ)

The lowest frequency, f₁ = v/2L, is the fundamental (first harmonic). The others are whole-number multiples of it: 2f₁, 3f₁ and so on. For a string, every harmonic is present, unlike a closed organ pipe, which has only the odd ones.

HarmonicLoopsNodes (with ends)WavelengthFrequency
1st (fundamental)122Lf₁ = v/2L
2nd23L2f₁
3rd342L/33f₁
n-thnn + 12L/nn f₁

Worked numericals

A guitar string: L = 0.65 m, tension 70 N, mass per unit length 0.4 g/m = 4 × 10⁻⁴ kg/m. v = √(70/0.0004) = √175 000 = 418 m/s. f₁ = 418/(2 × 0.65) = 322 Hz, f₂ = 644 Hz and f₃ = 965 Hz.
Finding the fundamental from a harmonic: A string of length 0.9 m vibrates in 3 loops at 120 Hz. The wavelength is 2L/3 = 0.6 m, so v = fλ = 120 × 0.6 = 72 m/s. The fundamental is 120/3 = 40 Hz.
Finding the tension: For the string above, with μ = 0.01 kg/m, T = μv² = 0.01 × 72² = 51.84 N.
Tuning: To raise the pitch of a string by changing its tension, remember that f ∝ √T. To double the frequency you need four times the tension. To tune the guitar string above from 322 Hz to 440 Hz, you need T = μ(2L f)² = 4 × 10⁻⁴ × (2 × 0.65 × 440)² = 131 N, nearly double the earlier 70 N.

More solved problems

Problem 1: Effect of changing length
Pressing a finger on a guitar string at the middle halves the vibrating length. f ∝ 1/L, so the frequency doubles and the note rises by one octave. This is how a guitarist plays different notes on the same string.
Problem 2: Nodes and antinodes
The 4th harmonic on a string has 4 loops, so 5 nodes (including the two ends) and 4 antinodes. Adjacent nodes are separated by λ/2 = L/4.
Problem 3: Heavier string
Two strings of the same length and tension, one with twice the μ of the other. f ∝ 1/√μ, so the heavier string has a frequency 1/√2 = 0.71 times the lighter one. This is why the bass strings of a guitar are thicker.

Practice questions (with answers)

  1. The fundamental frequency of a stretched string of length L, tension T and mass per unit length μ is
    (a) (1/L)√(T/μ)   (b) (1/2L)√(T/μ)   (c) (2/L)√(T/μ)   (d) (1/2L)√(μ/T)
  2. If the tension of a string is made four times, its frequency becomes
    (a) 2 times   (b) 4 times   (c) 1/2   (d) 16 times
  3. In a string fixed at both ends and vibrating in its 3rd harmonic, the number of antinodes is
    (a) 2   (b) 3   (c) 4   (d) 6
  4. The distance between two consecutive nodes is
    (a) λ   (b) λ/2   (c) λ/4   (d) 2λ
  5. Which harmonics are present in a string fixed at both ends?
    (a) only odd   (b) only even   (c) all   (d) none
Show answers
  1. (b) (1/2L)√(T/μ).
  2. (a) 2 times, since f ∝ √T.
  3. (b) 3, one in each loop.
  4. (b) λ/2.
  5. (c) all harmonics (n = 1, 2, 3, ...).

Common doubts

Why are the ends of the string nodes?

Because the string is fixed there and cannot move. The reflected wave is inverted at a fixed end, which makes the incoming and reflected waves cancel exactly at that point.

Do the nodes carry any energy?

A node does not move, so energy does not flow across it. Each loop between nodes holds its own energy, oscillating between kinetic and potential, while the net energy flow along the string is zero.

How is a standing wave different from a travelling wave?

In a travelling wave, every point oscillates with the same amplitude and the pattern moves along. In a standing wave, the pattern stays in place, the amplitude varies from zero at nodes to maximum at antinodes, and all points between two nodes move in phase.

What does the sonometer experiment show?

A sonometer measures the frequency of a string for different lengths and tensions. It verifies f ∝ 1/L at constant tension and f ∝ √T at constant length, and it can be used to find the frequency of a tuning fork.

Try it yourself

Standing Waves Resonance in Air Column Sound & Vibration