Ask a student how far the airport is and "20 km" is a fine answer. Ask which way to drive and "20 km" is useless: you also need a direction. That is the whole difference between a scalar and a vector.

The resultant of two vectors depends on the angle between them

The difference

ScalarVector
Described byMagnitude onlyMagnitude and direction
ExamplesDistance, speed, mass, time, temperature, energy, work, power, chargeDisplacement, velocity, acceleration, force, momentum, torque, electric field
AdditionOrdinary arithmeticVector rules (triangle or parallelogram)
Can be negative?Sign shows a convention (charge, work)Negative means opposite direction

Be careful with a few tricky ones. Current has a direction but is a scalar, because it does not follow vector addition. Pressure is a scalar, although it comes from a force. Work and energy are scalars, even though they are made from vectors.

Adding vectors

The magnitude of the resultant of two vectors A and B with an angle θ between them is:

R = √(A² + B² + 2AB cosθ)
Examples: forces of 3 N and 4 N at right angles: R = √(9 + 16) = 5 N. The same forces at 60°: R = √(9 + 16 + 12) = √37 ≈ 6.08 N. In the same direction, R = 7 N (maximum), and in opposite directions R = 1 N (minimum).

Resolving into components

A vector of magnitude F at angle θ to the x-axis has components F cosθ along x and F sinθ along y. For F = 100 N at 37°, the x-component is 100 × cos 37° ≈ 80 N and the y-component is 100 × sin 37° ≈ 60 N. Adding by components is usually the safest method for three or more vectors.

Dot product: vector × vector = scalar

A · B = AB cosθ

It is largest when the vectors are parallel and zero when they are perpendicular. Work is a dot product: W = F · d. For a 10 N force over 5 m at 60° to the motion, W = 10 × 5 × cos 60° = 25 J.

Cross product: vector × vector = vector

|A × B| = AB sinθ

The direction comes from the right-hand rule, perpendicular to both vectors. It is zero when the vectors are parallel. Torque (τ = r × F) and the magnetic force (F = qv × B) are cross products. For r = 0.5 m and F = 20 N at 30°, τ = 0.5 × 20 × sin 30° = 5 N m. Note that A × B = −(B × A), so the order matters.

Mistakes to avoid

Treating distance as displacement, adding magnitudes of vectors directly, and mixing up dot and cross products. A quick test: the dot product gives a number, the cross product gives a vector.

More solved problems

Problem 1: Resultant of two perpendicular forces
A 5 N force acts east and a 12 N force acts north. R = √(25 + 144) = 13 N, at an angle tan⁻¹(12/5) = 67.4° north of east.
Problem 2: Dot and cross product with components
Let A = 2i + 3j + k and B = i − j + 4k. A · B = 2 − 3 + 4 = 3. A × B = (3·4 − 1·(−1)) i + (1·1 − 2·4) j + (2·(−1) − 3·1) k = 13i − 7j − 5k. Check: |A × B|² = 169 + 49 + 25 = 243, and |A|²|B|² − (A · B)² = 14 × 18 − 9 = 243.
Problem 3: A boat in a river
A boat heads east at 4 m/s relative to still water, and the river flows north at 3 m/s. The resultant speed is √(16 + 9) = 5 m/s, at 36.9° north of east.
Problem 4: Work from components
A force F = 10i + 5j N moves an object by d = 3i + 4j m. W = F · d = 30 + 20 = 50 J.

Practice questions (with answers)

  1. Which of these is a vector quantity?
    (a) energy   (b) momentum   (c) pressure   (d) speed
  2. The dot product of two perpendicular vectors is
    (a) maximum   (b) one   (c) zero   (d) negative
  3. The cross product of two parallel vectors is
    (a) maximum   (b) zero   (c) one   (d) infinite
  4. The magnitude of A + B equals the magnitude of A − B when the angle between them is
    (a) 0°   (b) 90°   (c) 180°   (d) 45°
  5. Which product is commutative?
    (a) A × B   (b) A · B   (c) both   (d) neither
Show answers
  1. (b) momentum.
  2. (c) zero.
  3. (b) zero.
  4. (b) 90°, since then AB cosθ = 0.
  5. (b) A · B. For the cross product, A × B = −B × A.

Common doubts

Is electric current a vector?

Current has a direction, but it does not add like a vector: two currents entering a junction add as plain numbers. So it is a scalar. The same goes for pressure and surface tension.

Why do we need the angle to add two vectors?

Because vectors point in different directions, and parts of them can cancel. The angle decides how much cancels, which is the cosθ term in the resultant.

What is a unit vector?

A vector of magnitude one that gives only a direction. The vectors i, j and k point along the x, y and z axes, and any vector can be written as a combination of them.

Try it yourself

Vector Addition Relative Velocity Motion Types