Wheels are the oldest big invention, and rolling friction is the reason: it is far smaller than sliding friction. Rolling motion is also a favourite in JEE, because it joins translation and rotation in one problem.

Rolling without slipping: the contact point is at rest, the top moves at 2v

Rolling without slipping

A wheel of radius R rolls without slipping when the point touching the ground is at rest at that instant. This gives a simple link between the centre's speed and the spin:

v_cm = ω R   |   a_cm = α R

The top of the wheel moves at 2v relative to the ground, and the bottom at zero. The friction here is static friction. It does no work, which is why a rolling wheel does not lose energy to heat in the ideal case.

Kinetic energy of a rolling body

The total energy is the translational part plus the rotational part. With I = mk² (k is the radius of gyration):

K = ½mv² + ½Iω² = ½mv² (1 + k²/R²)
Bodyk²/R²Total KRotational share
Ring or hoop1mv²50 %
Solid disc or cylinder1/2¾ mv²33 %
Solid sphere2/57/10 mv²29 %

Rolling down an incline

a = g sinθ / (1 + k²/R²)

The larger the k²/R², the slower the body goes. So on the same incline, a solid sphere beats a disc, and a disc beats a ring, whatever their masses or radii. For a solid sphere on a 30° slope, a = (5/7) × 9.8 × 0.5 = 3.5 m/s², compared with 4.9 m/s² for a block sliding with no friction.

To roll without slipping, the friction available must be enough. For a solid sphere, the condition is μ ≥ (2/7) tanθ, which on 30° is about 0.165.

Rolling friction

A real wheel and the ground both deform slightly, and this makes a tiny resisting force: F = μ_r N. The coefficient of rolling friction μ_r is typically 0.01–0.02 for a tyre on a road, against 0.3 to 0.8 for sliding.

Numbers: a car of 1000 kg with μ_r = 0.015. F = 0.015 × 1000 × 9.8 = 147 N. To drag the same mass with a locked wheel and μ_k = 0.4, you need 3920 N, about 27 times more.

Mistakes to avoid

Using v = ωR when the body slips, forgetting the rotational part of the kinetic energy, and saying that static friction makes the energy decrease. In rolling without slipping, mechanical energy is conserved.

More solved problems

Problem 1: A sphere rolling down a height
A solid sphere rolls without slipping down a height of 1 m, starting from rest. Energy conservation gives mgh = ½mv² (1 + 2/5) = 0.7mv², so v = √(10gh/7) = √(10 × 9.8/7) ≈ 3.74 m/s. A frictionless sliding block would reach √(2gh) = 4.43 m/s. Part of the energy goes into rotation, so the rolling body is slower.
Problem 2: Ring versus disc
A ring and a disc roll from rest down a 30° incline of length 2 m. For the ring, a = g sinθ/2 = 2.45 m/s², so t = √(2L/a) = 1.28 s. For the disc, a = (2/3) g sinθ = 3.27 m/s², so t = 1.11 s. The disc wins, for any mass or radius.
Problem 3: Fraction of rotational energy
For a solid sphere, the rotational share of the total energy is (2/5)/(1 + 2/5) = 2/7, or about 28.6 %. For a disc it is 1/3 and for a ring 1/2.
Problem 4: A wheel of radius 0.4 m
The wheel turns at ω = 10 rad/s. For rolling without slipping, v = ωR = 4 m/s. The top point moves at 2v = 8 m/s relative to the ground and the contact point is at rest.

Practice questions (with answers)

  1. In rolling without slipping, the velocity of the point of contact with the ground is
    (a) v   (b) 2v   (c) zero   (d) ωR/2
  2. A solid sphere, a disc and a ring roll down the same incline from rest. The first to reach the bottom is the
    (a) ring   (b) disc   (c) sphere   (d) all together
  3. The friction in pure rolling on a level surface at constant speed is
    (a) large kinetic friction   (b) static friction, doing no work   (c) zero always   (d) rolling resistance only
  4. The coefficient of rolling friction is, compared with sliding friction,
    (a) much greater   (b) much smaller   (c) the same   (d) infinite
  5. The total kinetic energy of a rolling solid disc is
    (a) ½mv²   (b) ¾mv²   (c) mv²   (d) ¼mv²
Show answers
  1. (c) zero.
  2. (c) sphere, which has the smallest k²/R².
  3. (b) static friction, which does no work. (On a level surface at constant speed, it is practically zero.)
  4. (b) much smaller.
  5. (b) ¾mv².

Common doubts

Is friction needed for a wheel rolling at constant speed on a flat road?

Not in the ideal case. Once the wheel is rolling with v = ωR, the contact point is at rest and no friction is needed to keep it going. Friction is needed to start the rolling, to speed up, or to slow down.

Why is rolling easier than sliding?

In rolling the contact point does not slide, so there is no kinetic friction, only a small resistance from the deformation of the wheel and the surface. That is why the coefficient is 10 to 50 times smaller.

Why does the result not depend on the mass or the radius?

In the acceleration formula, only k²/R² appears, which depends on the shape of the mass distribution. Mass and radius cancel.

Try it yourself

Cycloid & Rolling Motion Rotational Inertia Friction Types