Kinematics is the part of physics where you describe motion without asking why it happens. It is also the first chapter where students lose marks over sign and vocabulary. Keep the definitions sharp and the formulas follow naturally.

A braking car: the area under the v-t line is the stopping distance

Distance and displacement

Distance is the total length of the path, a scalar that never decreases. Displacement is the straight line from start to finish, a vector that can be zero, or even negative.

Example: a person walks 3 km east and then 4 km north. Distance = 7 km. Displacement = √(3² + 4²) = 5 km, at an angle of about 53° north of east. A person who walks once round a circular track has covered a distance of 2πr and a displacement of zero.

Speed and velocity

Average speed = total distance / total time   |   Average velocity = displacement / time

A classic trap: you travel to a town at 60 km/h and return at 40 km/h over the same road. The average speed is not 50. It is 2 × 60 × 40 / (60 + 40) = 48 km/h, because you spend more time at the slower speed. The average velocity for the whole round trip is zero.

The three equations of motion

These work only for constant acceleration, a point that should be written at the top of every answer.

v = u + at
s = ut + ½at²
v² = u² + 2as

There is also the distance in the nth second: s_n = u + a(2n − 1)/2. Pick the equation that does not contain the quantity you neither know nor want. Missing time? Use v² = u² + 2as. Missing the final velocity? Use s = ut + ½at².

Worked numericals

Braking car: a car at 20 m/s brakes with a = −5 m/s². Time to stop: t = (0 − 20)/(−5) = 4 s. Stopping distance: s = 20²/(2 × 5) = 40 m. Double the speed and the stopping distance grows four times, not two. This is why speed limits near schools matter.
Free fall from a 80 m cliff, taking g = 10 m/s²: t = √(2h/g) = 4 s and v = gt = 40 m/s. In the fifth second of a free fall from rest, the distance covered is s₅ = 0 + 10 × (2×5 − 1)/2 = 45 m.

Reading graphs

On a position-time graph, the slope is the velocity. On a velocity-time graph, the slope is the acceleration and the area under the curve is the displacement. A straight sloping line on v-t means constant acceleration, which is the only case where the three equations are allowed.

Common mistakes

Using the formulas when acceleration is not constant, mixing km/h with m/s (divide km/h by 3.6), forgetting that g is negative when you take upward as positive, and treating distance as displacement. A quick habit helps: write the sign convention first, then list u, v, a, s and t with their values.

Need a quick calculation? Try this free scientific calculator — it shows every step.

Try it yourself

Equations of Motion Free Fall Motion Graphs