Ask most people why a wing generates lift and you'll hear some version of: air splits at the leading edge, the curved top surface is longer, so that air has to speed up to "arrive together" with the air going underneath, and faster-moving air means lower pressure (Bernoulli), hence lift. It's a tidy story, repeated in a huge number of textbooks and videos. It's also not correct — the air flowing over the top does not arrive at the trailing edge at the same time as the air underneath; in reality it gets there noticeably sooner. The "equal transit time" assumption that the whole explanation rests on simply isn't what happens.
What's actually happening: deflection and pressure difference together
The wing is shaped and tilted (its angle of attack) so that it deflects the oncoming air downward as it passes — a net downward push on the air, which by Newton's third law means the air pushes back up on the wing. This downward deflection, called downwash, is real and measurable behind any lifting wing. At the same time, the airflow genuinely does move faster over the curved top and slower underneath, producing the pressure difference Bernoulli's equation describes — but that faster flow is a consequence of the wing's shape and angle forcing the air to curve around it, not of any requirement that both streams "arrive together." Lift is the net result of both the pressure difference and the momentum change in the deflected air; they aren't two competing explanations, they're two views of the same underlying airflow.
ρ is air density, v is airspeed, A is wing area, and C_L is the lift coefficient — a number that bundles together the wing's shape and its angle of attack. This single formula is where the genuinely important, testable physics lives: lift depends on the square of airspeed.
Why this v² dependence matters for real flying
Because lift collapses roughly as the square of speed, there's a well-defined minimum airspeed — the stall speed — below which a wing simply cannot generate enough lift to support the aircraft's weight at a sustainable angle of attack, and the drop-off as you approach it is sharp, not gradual. It's also why aircraft take off and land facing into the wind whenever possible: lift depends on airspeed (speed relative to the air), not groundspeed, so a headwind lets the wing reach its required lift-generating airspeed at a lower groundspeed, shortening the runway needed.
Why wing shapes differ so much between aircraft
A glider cruising slowly needs a strongly cambered (curved) wing to claw enough lift out of its low v² term, accepting the extra drag that comes with it since speed isn't the priority. A fighter jet already has plenty of v² to work with at high speed, so it uses a thin, low-drag profile instead — a heavily cambered wing at fighter-jet speeds would generate dangerously excessive lift and drag. There's no single "best" wing shape because the v² term in the lift equation changes what's actually needed at different speed regimes.
