Polarized sunglasses cut glare off wet roads and water far better than ordinary tinted lenses. The reason traces back to a specific angle, discovered by David Brewster in 1815, where reflected light stops being an ordinary mix of vibration directions and becomes almost perfectly one-directional.
Not all vibration directions reflect equally
Ordinary sunlight vibrates in every direction perpendicular to its travel — genuinely unpolarized. Reflection doesn't treat all of those directions the same way, though. At one specific angle of incidence, the light vibrating IN the plane of incidence gets reflected with essentially zero intensity, leaving only the perpendicular component behind. What comes off the surface at that angle is, for practical purposes, completely polarized.
For light going from air into ordinary glass (n≈1.5), that works out to about 56.3°. Into water (n≈1.33), closer to 53°. Different materials, genuinely different angles — there's no single universal "the" Brewster angle, it always depends on what you're reflecting off.
The 90° connection isn't a coincidence — it's the actual cause
At exactly Brewster's angle, the reflected ray and the refracted ray end up perpendicular to each other. That's not some separate curious fact sitting alongside the polarization effect — it IS the polarization effect, mechanically. When light refracts into the second medium, it sets charges there oscillating along the same direction as the refracted light's own vibration. Those oscillating charges act like tiny radiating dipoles, and a basic property of dipole radiation is that it's strongest perpendicular to the oscillation axis and drops to exactly zero directly along that axis. At Brewster's angle specifically, the reflected direction lines up exactly with that oscillation axis for the in-plane component — so that component genuinely can't radiate any energy back along the reflected path at all. The perpendicular component, not sharing that alignment, reflects normally. Hence: complete polarization, at that one angle, not a gradual approach to it nearby.
Why polarized sunglasses specifically target horizontal surfaces
Sunlight reflecting off water, wet roads, or glass at angles reasonably close to Brewster's angle comes off substantially polarized, concentrated in the horizontal direction for typical viewing angles. Polarized sunglasses are made with their polarizing axis oriented vertically on purpose, blocking that predominantly horizontal glare while letting normally-polarized light from the rest of the scene through more or less unaffected. Ordinary tinted lenses reduce everything equally regardless of polarization, which is why they don't manage the same selective glare cut.
The same trick, aimed at a different sky effect
Photographers rotate polarizing filters to deepen a blue sky for a similar underlying reason: atmospheric scattering also polarizes light substantially, roughly 90° from the sun's position, and rotating the filter to block that scattered polarized component darkens the sky noticeably without similarly dimming clouds (which scatter light in a way that isn't strongly polarized). Same physical principle, applied to a completely different reflecting/scattering geometry.
A subtlety worth knowing: white light complicates things slightly
Since Brewster's angle depends on n₂, and refractive index shifts slightly with wavelength (ordinary dispersion), there's technically no single angle that's simultaneously exact for every color in white light at once. In practice the variation is small enough that the reflection still comes out overwhelmingly well-polarized across the visible spectrum — but a mathematically perfect, wavelength-independent polarization isn't quite achievable with ordinary glass. A fine-grained refinement beyond the textbook single-wavelength version of the law.
Inside a laser, not just outside one
Laser cavities sometimes use windows deliberately cut at Brewster's angle — introducing essentially zero reflection loss for light polarized in the plane of incidence, while introducing real loss for the perpendicular polarization. Since a laser naturally favors whichever mode loses the least energy per pass, this asymmetric loss forces the whole cavity to oscillate preferentially in one polarization direction, producing a cleanly polarized output beam using nothing more than a carefully angled piece of glass — no separate, lossier polarizing filter required inside the cavity at all.
